Before Lighting:

1. Trim the Wick: Keep the wick to 1/4 inch to prevent excessive smoke and ensure a clean burn.
2. Check the Wax: Ensure the wax is dry and free of debris.
3. Choose the Right Location: Avoid drafts, direct sunlight, and heat sources.

During Burning:

1. Monitor the Flame: Adjust the wick if the flame is too high or flickering.
2. Avoid Over burning: Don’t burn for more than 4-6 hours at a time.
3. Keep the Pool Clean: Ensure the melted wax pool is free of debris.

After Burning:

1. Extinguish Properly: Use a snuffer to prevent wax splatters.
2. Trim the Wick (Again): Maintain the 1/4 inch wick length.
3. Store Properly: Keep candles away from heat sources, moisture, and direct sunlight.

Additional Tips:

1. Avoid Touching the Wick: Oils from your skin can cause the wick to become unstable.
2. Use a Candle Snuffer: Prevents wax splatters and ensures a clean extinguish.
3. Rotate Candles: Ensure even burning and prevent uneven wax melting.
4. Clean the Candle Holder: Regularly wipe down the holder to prevent debris buildup.

Common Candle Care Mistakes:

1. Not Trimming the Wick: Leads to excessive smoke and uneven burning.
2. Burning Too Long: Causes overheating, wax depletion, and soot buildup.
3. Ignoring Drafts: Affects flame stability and wax melting.

Candle Types and Special Care:

1. Soy Wax Candles: Require more frequent wick trimming due to their softer wax.
2. Beeswax Candles: Benefit from occasional polishing to maintain their natural glow.
3. Gel Candles: Require careful handling to avoid damaging the gel wax.

Troubleshooting Common Issues:

1. Soothing: Caused by improper wick trimming or drafts.
2. Wax Pooling: Results from uneven burning or overheating.
3. Flickering: Often due to drafts or incorrect wick length.